Bully Dog 81203 Rapid Flow - Manual (Page 6)

7
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 81610, 81203
Tail Pipe Tip
Down Pipe
Second Piece Down Pipe
Catalytic Converter
(Stock)
24” Straight Pipe
Muffler
Front Piece Tail Pipe
Intermediate Pipe
Clamp
Hanger B
Hanger C
Hanger A
Clamp
Clamp
Gasket
Clamps
In these steps you will install the Rapid Flow Exhaust System.
1. It is suggested that before installing the system on the truck, the Rapid Flow Exhaust System be laid out on a
large flat surface to acknowledge the location of each piece
Tool s Needed:
Silicone Spray Lubricant •
9/16” Wrench •
7/16” Deep Socket •
Socket Wrench •
Tape measure •
INSTALLATION OF THE BULLy DOG RAPID FLOw EXHAUST SySTEM
QUICk OVERVIEw FULL EXHAUST
CLAMP AND HANGER PLACEMENT