beautypg.com

Intake installation – Bully Dog 51200 Rapid Flow Induction (RFI) Cold Air Intake User Manual

Page 16

background image

15

5. Secure the long silicone tube onto MAF intake tube using the band clamp.

6. If the stage 2 tube/long silicone coupler run close to the power steering reservoir as it
will on some vehicles adjust accordingly by pressing the tube away from the power steering
reservoir and tightening the final band clamp over the stage 2 tube simultaneously.

7. The final step of the Rapid Flow Cold Air
Intake is to plug the mass air flow harness plug
back into the mass air flow sensor. Be sure to
lock the MAF sensor plug in place with the lock
mechanism on the underside of the plug.

Intake Installation