Bully Dog 51200 Rapid Flow Induction (RFI) Cold Air Intake - Manual (Page 12)

11
3. Fit the intake tube with the MAF into the Rapid Flow intake lid and snap it into place. To
secure the tube to the lid push the two items together until the tube snaps into place, which
can be noted by the “pop,” that is made when the interference snap locks in place. The tube
should easily rotate once the interference snaps lock in place.
4. With the tube secure in the lid now install the air filter onto the part of the tube that is
inside of the lid. Secure the filter using the supplied band clamp, tighten the clamp until the
filter cannot be easily pulled off by hand.
Intake Install Prep
Bottom View Side View