beautypg.com

Rfi cold air intake – Bully Dog 53152 Rapid Flow Induction (RFI) Cold Air Intake User Manual

Page 9

background image

8

RFI COLD AIR INTAKE

3. Attach the MAF sensor to the Bully Dog intake tube. Use the

nylon washers and the black oxide Phillips screws provided

by Bully Dog. Use one washer on each side.

4. Connect the silicone couplers to the stage 2 air intake tube.

Do not tighten the band clamps. Leave them loose so you

can adjust the couplers into the correct position.

5.5” Band Clamp

5.5” Band Clamp

Silicone Coupler

Silicone Hump Coupler

5” Band Clamp

5” Band Clamp

Stage 2 Tube

IMPORTANT: Do not overtighten the screws, as

this could damage the MAF sensor.