beautypg.com

Rfi cold air intake – Bully Dog 53152 Rapid Flow Induction (RFI) Cold Air Intake User Manual

Page 7

background image

6

RFI COLD AIR INTAKE

2. Unplug the mass air flow sensor.

3. Use a flat-head screwdriver to loosen the band clamps

located at each end of the stock intake tube. You do not

need to completely disconnect the clamps, just loosen them

enough to remove the tube.

4. Remove the stock intake tube and set it aside.

5. Remove the OEM

intake box. The OEM box is held in

place by rubber grommets, so it will easily pop out if you

gently pull upward. You will need the Mass Air Flow sensor

off the intake box tube later in the installation.