Bully Dog 53152 Rapid Flow Induction (RFI) Cold Air Intake User Manual
Page 2
1
RFI COLD AIR INTAKE
Introduction
This manual provides step-by-step installation instructions for
the Bully Dog Rapid Flow Induction (RFI) Cold Air Intake for the
GM Duramax Diesel 6.6L LMM ’07.5-’10 engines. Installation
requires a few basic tools and takes about 20 minutes.
Table of Contents
Parts and Tools . . . . . . . . . . . . . . . . . . . . . . .1-4
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . .5-10
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . .11-12
Parts Included
RFI Enclosure Lid . . . . . . . . . . . . . . . . . . . . (
53102-1
)
RFI Enclosure Base . . . . . . . . . . . . . . . . . . . (
53102-2
)
Air Intake Tube with MAF Mount . . . . . . . . . (
53102-3
)
Stage 2 Air Intake Tube . . . . . . . . . . . . . . . . (
53153-4
)
Silicone Coupler – Straight . . . . . . . . . . . . . (
53104-11
)
Silicone Coupler – Hump . . . . . . . . . . . . . . (
53104-12
)
5″ Worm Drive Band Clamps (2) . . . . . . . . . (
51104-7
)
5 .5″ Worm Drive Band Clamps (2) . . . . . . . (
52102-94
)
Air Filter with Band Clamp . . . . . . . . . . . . . (
224800
)
Black Oxide Phillips Screws (2) . . . . . . . . . . (
54100-94
)
T20 Security Torx® Bit . . . . . . . . . . . . . . . . (
229120
)
Nylon Washers (2) . . . . . . . . . . . . . . . . . . . . (
51201-94
)
Tools Needed
• Flat-head screwdriver
• Phillips screwdriver
• Bit driver
• 10 mm socket and wrench