beautypg.com

Rfi cold air intake, Installing the rfi intake – Bully Dog 53152 Rapid Flow Induction (RFI) Cold Air Intake User Manual

Page 10

background image

9

RFI COLD AIR INTAKE

Installing the RFI Intake

1. Mount the RFI Enclosure Base in the space made by

removing the stock intake. Use the three machine screws

that you set aside during the removal of the stock intake

(step 6) to secure it in the engine bay.

2. Connect the stage 2 air intake tube to the Bully Dog air intake

tube (with MAF mount) and the turbo inlet tube in the engine

bay. Leave the band clamps loose until you are sure that all

of the connections are properly aligned, and then tighten the

clamps with a flat-head screwdriver.

IMPORTANT: Do not over-tighten the screws, as this could damage the Bully Dog intake.