Bully Dog 53205 Rapid Flow Induction (RFI) Cold Air Intake - Manual (Page 7)

11 12
RFI COLD AIR INTAKE RFI COLD AIR INTAKE
Installing the RFI Intake
1. Install the prepared RFI base/air filter/MAF tube assembly.
a. Place the base in the space left after removing the stock
filter box.
b. Attach the RFI base to the vehicle frame with the
provided M6 flanged bolts.
c. IMPORTANT: Do not overtighten the bolts, as this could
damage the Bully Dog intake.
2. Install the Stage 2 RFI tube.
a. Connect the silicone couplers to the RFI MAF tube and
the throttle body.
b. Do not tighten the band clamps yet; leave them loose.
(You will tighten them on step 5, page 13.)
6. Connect the silicone couplers to the Stage 2 RFI tube.
• The hump coupler connects with the RFI MAF tube.
• The straight coupler connects with the throttle body.
• Put the band clamps on, but do not tighten them.
7. Slide the hose clamps onto the silicone hose, but do not
tighten them.