Bully Dog 53205 Rapid Flow Induction (RFI) Cold Air Intake - Manual (Page 3)

3 4
RFI COLD AIR INTAKE RFI COLD AIR INTAKE
Silicone Hose and
Couplers
The high-quality 3-ply hose
and couplers are durable,
flexible and strong.
Hose and Band
Clamps
Adjustable clamps connect
and hold all tubing in place.
T15 Security Torx® Bit
The mass air flow sensor is
attached to the stock intake
tube using tamper resistant
pin-in-Torx® screws. Bully
Dog includes a Torx® bit for
convenience. If the bit is
lost it can be purchased at any auto parts store.
Black Oxide Screws
and Washer
Bully Dog provides two
3 ⁄
8
″ black oxide screws to
secure the MAF sensor to
the RFI MAF tube. Also
included are a 3 ⁄
4
″ black
oxide screw and a washer to secure the MAP sensor to the
Stage 2 RFI Intake tube.
RFI MAF Tube
The air intake tube
comes with a precisely
manufactured mount for
the stock MAF sensor. The
mount has inset screw
mounts that are designed
to work with the black oxide
screws provided by Bully Dog. The tube is also designed with
a snap-fit feature that will secure it tightly to the RFI lid.
Stage 2 RFI Tube
Designed to fit in your
engine bay, the stage 2 air
intake tube improves air
flow into the turbo through
the smoothest curves
possible to prevent any loss
of power and provide sleek
style under the hood. The
stage 2 tube also includes a
precision mount for the stock MAP sensor.
Air Filter
with Band Clamp
The Rapid Flow Induction Cold
Air Intake system includes an
ISO 5011 certified eight-layer
oil filter. The air filter is housed
within the intake enclosure and
secured onto the end of the air
intake tube using the included
filter clamp and a flat-head
screwdriver.