beautypg.com

Stock removal – Bully Dog 53254 Rapid Flow Induction (RFI) Cold Air Intake User Manual

Page 7

background image

11

12

3B. Loosen both band clamps at the throttle body and stock intake enclosure. Once these
are loose remove intake tube.

4. Remove the CCV recirculation tubes that are connected to the engine. Depress the grey
tab and pull away from the engine. There are two tubes to remove.

Stock Removal

Loosen Band Clamp

Remove CCV

recirculation

tubes

5. The intake enclosure is connected to a plate that sits beneath it by rubber grommets. It
can be easily removed by pulling up on the end of the tube. Carefully remove the entire
filter housing in one piece.

6. Remove stock intake mounting plate by removing 4 10mm bolts.

Stock Removal