Bully Dog 53254 Rapid Flow Induction (RFI) Cold Air Intake - Manual (Page 10)

17 18
5. Reconnect MAF sensor. Plug in and push down on red tab to lock.
6. Install the air filter over the MAF sensor tube on the inside of the RFI intake bottom.
Position the air filter onto the end of the tube so that the filter points slightly downward
and then tighten the air filter clamp with a flat head screw driver. The clamp should be tight
enough that it is very difficult to pull the air filter off of the tube with your bare hands.
RFI Installation RFI Installation
7. Install the RFI Lid onto the RFI bottom and secure the lid using the lid latches. The lid
latches work similar to an OEM style system, simply snapping on.
8. The final step of this installation is to replace the engine cover and reconnect the battery
terminals.