Bully Dog 40605 John Deere 8030 and 8020 Series Module - Manual (Page 5)

4
inStallation inStructionS:
1. Open Hood of Tractor, install module when engine is
not running and cool.
2.: Place module below the air filter in a safe location
and run cable along the wiring harness toward the top
of the engine.
3. Remove plug from the MAP sensor located at the
top of the engine.
rPm inSTAllATiOn
MAP Sensor
Note: Make sure the gray cap is securely fas-
tened to male plug and is not in the MAP Sensor.