Bully Dog 40605 John Deere 8030 and 8020 Series Module User Manual
Page 2
1
TROUBLESHOOTING:
If you have questions during the installation of this product,
please visit
www.bullydog.com/Product_Updates.php
.
The latest version of these instructions can be found at the same
location. Technical support is available by calling 866-bul-
lydog (866-285-5936).
TABle OF COnTenTS
TABLE OF CONTENTS
INTRODUCTION ...............................................................................................pg. 2
paRTS DESCRIpTIONS ......................................................................................pg. 3
MODUlE INSTallaTION
8030 SERIES .................................................................................................. PGS. 4-6
8020 SERIES ................................................................................................ PGS. 7-10
OpERaTINg INSTRUCTIONS ............................................................................pg. 11
INTERNET UpDaTE.................................................................................. pgS. 12-14
INTRODUCTION
You have just purchased the most technologically advanced tractor module available for the John Deere 8030 and
8020 series tractors. The Rapid Power module is the safest and longest lasting module on the market. The Rapid
Power module also comes with free technical support and internet update ability, just call: 1-866-285-5936.
This instruction set outlines how to install and operate the rapid Power module on
All John deere 8030
and now 8020 series tractors.
Always remember to remove the module from the tractor before taking it in for any kind of service as the module
may interfere.
Bully Dog recommends installing a pyrometer gauge to monitor exhaust gas temperature when using any
product to increase horsepower.
*Due to John Deere’s new software updates, the ‘High’ power level should not be used for the 08’ John
Deere 8030 series tractors or any 8030 tractor that has been re-flashed by a John Deere dealer. Use of the
‘High’ power setting with these tractors will result in warning lights and codes. If warning codes appear
while operating, shut the tractor down, adjust the module to the ‘Low’ power level, and
continue operation. If problems persists contact Bully Dog Tech Support at 1-866-285-5936.