Bully Dog 40605 John Deere 8030 and 8020 Series Module - Manual (Page 11)

10
rPm inSTAllATiOn
11.: Zip Tie module and loop and zip tie any remaining
cable. Ensure that the cable and module will be safe
from moving parts (such as the starter/flywheel) or
hot exhaust system parts.
Tractors Stock Low Power Level
Total Horsepower
High Power Level
Total Horsepower*
JD 8130* 180 HP ~200 ~215
JD 8230* 200 HP ~220 ~240
JD 8330* 225 HP ~250 ~270
JD 8430* 250 HP ~275 ~300
JD 8530* 275 HP ~300 ~330
JD 8230 T* 200 HP ~220 ~240
JD 8330 T* 235 HP ~260 ~280
JD 8430 T* 255 HP ~280 ~305
JD 8120 (T) 170 HP ~200 ~220
JD 8220 (T) 190 HP ~220 ~250
JD 8320 (T) 215 HP ~250 ~280
JD 8420 (T) 235 HP ~270 ~305
JD 8520 (T) 255 HP ~290 ~330
This chart illustrates the approximate power increase when the Rapid Power
Module is set at the desired power level.~ Denotes an approximate value.
*Due to John Deere’s new software updates, the ‘High’ power level should not be
used for the 08’ John Deere 8030 series tractors or any 8030 tractor that has been
re-flashed by a John Deere dealer. Use of the ‘High’ power setting with these
tractors will result in warning lights and codes. If warning codes appear while
operating, shut the tractor down, adjust the module to the ‘Low’ power level,
and continue operation. If problems persists contact Bully Dog Tech Support at
1-866-285-5936.
Warning: Do not remove
module while tractor is
running. Shut down machine
and then remove module.