Bully Dog 47000 Nitrous Kit - Manual (Page 6)

5
NITROUS KIT
GT/WatchDog Setup
Control the Nitrous Kit with a Bully Dog GT or WatchDog unit;
configure up to five different setting combinations (stages).
A stage will only activate when the vehicle reaches both the
parameter range (Pyrometer temperature, speed, boost or
RPM) and the throttle position that are selected for that stage.
To support the Nitrous Kit, all GTs and Watchdogs must be updated to
software version 1.1.4.3 or newer.
See page 7 for a menu blowout.
1. Go to the Main Menu
(top left button).
2. Select Nitrous/Methanol Setup.
3. Select the stage (1-5).
4. Select the parameter.
a. Press the Parameter button.
b. Highlight the desired parameter.
◦ Use the buttons on the
right to scroll up and
down the parameter list.
◦ Press the button on the
left that lines up with the
desired parameter.
◦ Choosing None will disable the stage.
c. Press Go Back (top left button).
Go Back
MAIN MENU
to General Disp
Vehicle Setup
User Options
Performance Testing
Nitrous/Methanol Setup
Go Back
NIT/METH SETUP
to Main Menu
Stage 1
Stage 2
Stage 3
Stage 4
Go Back
STAGE 1
to NIT/METH Menu
Parameter: Boost
Lower Limit: 5
Upper Limit: 25
Throttle Position: 90
Go Back NIT PARAMETER
to Stage Menu
None
Pyro 1
Pyro 2
Speed