Bully Dog 47000 Nitrous Kit User Manual
Page 2
1
NITROUS KIT
Introduction
The Bully Dog Nitrous Kit allows you to control an
electromechanical solenoid with a GT™ or WatchDog™; it
automatically activates the solenoid if adjustable conditions
like throttle position, rpm and/or speed are met.
Table of Contents
Parts .....................................................................1-2
Physical Installation ..............................................2-4
GT/WatchDog Setup ............................................5-6
Menu Blowout ......................................................7
Contacting Technical Support..............................8
Parts Included
Control Module ....................................................(
47020
)
Wiring Harness ....................................................(
47020-98
)
Master Switch ......................................................(
47020-6
)
Hook and Loop Fastener .....................................(
40390-94
)
Zip ties .................................................................(
1-NYTIE8
)
Fuse Tap ...............................................................(
PART #
)
Tools Needed
• Wire crimper
Up to five standard wire crimps are also required for
installation; the crimps are not included in the Nitrous Kit.