Bully Dog 47000 Nitrous Kit - Manual (Page 4)

3
NITROUS KIT
3. Mount the control module (use the hook and loop
fastener and/or zip ties to secure it in place).
4. IMPORTANT: Before beginning installation, disconnect
your battery at the negative terminal. Failure to
disconnect the battery could result in personal injury
and/or damage to your vehicle.
5. Connect the wiring harness to the control module.
‣ Plug set A
‣ The connections are color coded
(black to black and gray to gray).
6. Connect the ground wire to the vehicle frame.
‣ Wire C (black wire).
‣ Use the designated
ground bolt.
‣ If the designated
ground bolt is not
available, use a
stock frame bolt.
7. Connect the power wires:
‣ Wire D connects to the
key-on fuse located in
step 1.
‣ Wire B connects to the
positive battery terminal.
A
B C
D
E & F