Blomberg GSN 9487 XSP - Manual (Page 34)

33 EN
1. Turn the micro filter (3) and
coarse filter (2) assembly counter
clockwise and pull it out from its
seating (A).
6 Maintenance and cleaning
Service life of the product extends and
frequently faced problems decrease if it
is cleaned at regular intervals.
A
Unplug the product and turn off the
tap before attempting any cleaning
procedures.
C
Do not use abrasive substances for
cleaning.
C
Clean the filters and impellers at
least once a week.
Cleaning the outer surface of
the product
Clean the outer surface and door
gaskets of the product gently with a mild
cleaning material and damp cloth. Wipe
the control panel only with a damp cloth.
Cleaning the interior of the
machine
—
Clean the interior of the machine
and the tank by running a prewash
programme without detergent or
a long washing programme with
detergent based on the degree of
soiling.
—
If water has remained in the
machine, drain the water by
performing the procedures under
the topic "Canceling a programme".
If the water cannot be discharged,
clean any leftover deposits that
have piled up in the bottom of the
machine, blocking the water path.
Cleaning the filters
Clean the filters at least once a week
in order for the machine operates
efficiently. Check if food residues are left
on the filters. If there are food residues
on filters, take them out and clean well
under running water.
1031
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
2. Pull out the metal / plastic filter (1)
(B).