Blomberg GSN 9487 XSP - Manual (Page 30)

29 EN
Program indicator 15 c lights up when
the program is over. Remaining Time
Indicator ( 3) displays “0:00”.
Canceling a Program
Press Start / Pause / Cancel button ( 2)
for three seconds to cancel a program
that is already running. Release the
button when symbol ( 12) start flashing
in the display. For a couple of minutes
the machine will fulfill the necessary
operations required for cancellation.
Remaining time indicator ( 11) displays
“0:00”. You may select and operate a
new program following the program
cancellation process. There might be
residues of detergent or rinse aid left
in the machine and/or on the pieces
being washed depending on the step
the previous program was in at the
time of such cancellation.
Changing a Program
If you want to change running program,
first of all press Start / Pause / Cancel
button ( 2) to switch your machine into
pause mode. Second, switch to the
desired program by pressing Program
Selection button ( 4). Third, Start the
new program by pressing Start / Pause
/ Cancel button ( 2) again. Your new
selection will resume operation from
the step in the previous program (For
example, if the previous program was
in rinsing step, the new one will also
start from the rinsing step). If you want
to run the newly selected program from
the beginning, you have to apply the
program cancellation process first and
then select a new program.
Programming the Delayed
Start
You can delay the start of the selected
program until 9 hours. Delayed start
can not be set after the program starts.
The selected program must not be
started in order to be able to set the
delay time.
Delayed start indicator sand glass ( 13)
will start flashing when the delayed
start button ( 6) is pressed. You can
set the desired time by pressing the
delayed start button ( 6). Press the
Start / Pause / Cancel button ( 2) after
setting the time. The delayed start
indicator sand glass ( 13) and play icon
( 12) will remain lit on the display during
the delayed start countdown and the
delay time indicator ( 11) will display
the remaining time. Program will start
automatically when the countdown is
over.
You can use the delayed start function
if you are utilizing the economic
electricity tariff.
If you want to change the program
or functions while the delayed start
function is enabled, then pause the
machine by pressing the Start / Pause
/ Cancel button ( 2). You will see that
the countdown stops. The delayed start
indicator will start flashing. Select the
new program and/or add the functions
as described in Program Selection
and Table of Average Consumption
Values. Resume the delayed start
countdown by pressing the Start /
Pause / Cancel button ( 2).
If you want to cancel delayed start
countdown while it is in progress,
then press the Start / Pause / Cancel
button ( 2) for three seconds. Release
the button when symbols ( 12) start
flashing in the display. For a couple