Blomberg GSN 9487 XSP - Manual (Page 31)

30 EN
of minutes the machine will fulfill
the necessary operations required
for cancellation. Remaining time
indicator ( 11) displays “0:00”. You may
select and operate a new program
following the delayed start countdown
cancellation process.
If you want to select a new delayed
start time while the delayed start
countdown is in progress, then pause
the machine by pressing the Start /
Pause / Cancel button ( 2). Set the
desired time by pressing the Delayed
Start Button ( 6). Start the countdown
for the new time by pressing the Start /
Pause / Cancel button ( 2) again.
Salt Indicator
Please check the salt indicator ( 9) on
the display to see whether there is
enough softening salt in your machine
or not. You need to refill the powder
dispenser whenever the salt warning
indicator light lights.
WARNING:
If the water hardness level is stored
as ( r1), salt indicator will never come
on even if the salt container is empty.
(Adjusting the water hardness level is
explained in Water Softening System
section.)
Rinse Aid Indicator
Check the rinse aid warning display
( 10) on the screen to find out if there
is sufficient amount of rinse aid in your
machine. You must refill the rinse aid
container when the rinse aid indicator
comes on.
WARNING:
If the Rinse Aid Indicator is set to
(OFF), rinse aid indicator will never
come on even if the rinse aid container
is empty.
Rinse Aid Indicator Setting
•
When your machine is switched
off, press Half Load button ( 5) and
then On / Off button ( 1) to switch it
on.
•
Hold Half Load/Tablet Detergent
button ( 5) pressed and release On /
Off button ( 1).
•
Keep Half Load/Tablet Detergent
button ( 5) pressed for three
seconds more.
•
Rinse Aid Indicator ( 10) comes on
and the stored rinse aid indicator
status of your machine appears on
the display in the format of “ON” or
“OFF”.
•
You can change the status of the
indicator as “ON” or “OFF” with
Start / Pause / Cancel button ( 2).
If you switch off the machine with
“On/Off” button ( 1) when the status
is “ON”, then the rinse aid indicator
will come on when the rinse aid
level in your machine becomes low
while the machine is in use. If you
switch off the machine with “On/
Off” button ( 1) when the status is
“OFF”, then the rinse aid indicator
will never come on.
Starting Your Machine
•
Plug the mains plug into the wall
socket.
•
Open the tap.
•
Open the door.
•
Place the dishes.
•
Check if the upper and lower
impellers rotate freely.
•
Put sufficient amount of detergent
in the detergent dispenser and