Blomberg GSN 9487 XSP - Manual (Page 12)

11 EN
4 Prewashing
Tips for energy saving
Following information will help you
use the product in an ecological and
energy-efficient manner.
•
Wipe away any coarse food
remnants on the dishes before
putting them in the product.
•
Operate the product after filling it
completely.
•
When selecting a programme,
refer to the "Programme Table".
•
Do not put more detergent than
suggested on the detergent
package.
Water softening system
C
The dishwasher requires soft
water. If the hardness of the water
is above 6°dH, the water must be
softened and descaled. Otherwise,
ions that create the hardness will
accumulate on the surfaces of the
dishes and may adversely affect
the washing, shining and drying
performances of the product.
The product is equipped with a water
softening system which reduces the
hardness of incoming water. This
system softens the supply water that
enters into the product to a level that
will allow washing the dishes with the
required quality.
Adjusting the water softening
system
Washing performance will increase
when water softening system is
adjusted properly.
Use the test stripe supplied with the
product to determine the supply water
hardness in order to adjust the system.