Blizzard Lighting SnoKontrol (Rev B) - Manual (Page 7)

SNOKONTROL Manual Rev B.
Page 7
Number Button/Fader/Connection Does...
1 Scanner Select Buttons Fixture selection
2 Scanner Indicator LEDs Indicates the fixture(s) currently selected
3 Scene Select Buttons
Universal bump buttons representing scene location for storage and selec-
tion
4 Channel Faders
Adjusts DMX values - Channel 1-16 may be adjusted after pressing the
respective scanner select button
5 Program Button Enters programming mode
6 Music/Bank Copy Button
Activates Music mode -or- functions as the command copy button during
programming
7 LED Display Displays pertinent operating data
8 Mode Indicator LEDs Provides operating mode status - (manual, music or auto)
9 Bank Up Button Increments scene/step in bank/chase
10 Bank Down Button Decrements scene/step in bank/chase
11 Tap Display Button
Sets the chase speed by tapping the button -or- toggles between DMX
value and percentage
12 Blackout Button Sets the shutter/dimmer value of all fixtures to ZERO
13 Midi/ADD Button Activates MIDI external control -or- confirms the record/save process
14 Auto/Del Button
Activates Auto mode -or- functions as the delete button during program-
ming
15 Chaser Buttons Activates/accesses chase 1-6
16 Speed Fader Adjusts scene hold time or step speed within a chase
17 Fade Time Fader Sets the fade time between two scenes in a chase (crossfade)
18 Page Select Button Toggles between fader page A and B while in manual mode
19 MIDI Input Jack For external triggering of banks & chases using a MIDI device
20 DMX Output Jack DMX signal output
21 DC Input Jack Power input, DC9V @2.0A
22 USB Lamp Jack ONLY ONLY for use with the included USB LED lamp
23 Power Switch Turns the unit On/Off
2.4 Nifty, Spiffy Diagram (back)
19 20 21 22 23