Blizzard Lighting Kontrol 6 Skywire(Rev. A) - Manual (Page 4)

Page 4
KONTROL 6 Skywire Manual Rev. A Copyright © 2014 Blizzard Lighting, LLC
IMPORTANT SAFETY INSTRUCTIONS
• Please keep this User Guide for future use. If you sell the unit to someone
else, be sure that they also receive this User Guide.
• ALWAYS make sure that you are connecting to the proper voltage, and that
the line voltage you are connecting to is not higher than that stated on the
decal or rear panel of the fixture.
• This product is intended for indoor use only.
• To prevent risk of fire or shock, do not expose fixture to rain or moisture.
• Make sure there are no flammable materials close to the unit while operat-
ing.
• The unit must be installed in a location with adequate ventilation, at least
20in (50cm) from adjacent surfaces. Be sure that no ventilation slots are
blocked.
• ALWAYS disconnect from the power source before servicing or replacing
fuse and be sure to replace with same fuse size and type.
• ALWAYS secure fixture using a safety chain. NEVER carry the fixture by its
head. Use its carrying handles.
• DO NOT operate at ambient temperatures higher than 104°F (40°C).
• In the event of a serious operating problem, stop using the unit imme-
diately. NEVER try to repair the unit by yourself. Repairs carried out by
unskilled people can lead to damage or malfunction. Please contact the
nearest authorized technical assistance center. Always use the same type
spare parts.
• NEVER connect the device to a dimmer pack.
• Make sure the power cord is never crimped or damaged.
• Never disconnect the power cord by pulling or tugging on the cord.
• Avoid direct eye exposure to the light source while it is on.
Caution! There are no user serviceable parts inside the unit. Do not open
the housing or attempt any repairs yourself. In the unlikely event your unit
may require service, please contact Blizzard Lighting at support@blizzard-
lighting.com.
1.5 Instructions on Our Instructions
We try to make these manuals easy to read and as fun as reading an in-
struction manual can be. Because there are buttons, switches, sliders and
knobs galore on most of our products, it makes sense to refer to things in
a consistent fashion. So, when you see text formatted in certain ways, it
should say to you “Hey! Look at me! I MEAN something, dammit!”
Special Text What It Means
LED Text displayed on the fixture’s LED control panel
Button to be pressed
MENU --> SHMD A sequence to be followed
000 <-> 255 A range of values