Blizzard Lighting Kontrol 6 Skywire(Rev. A) - Manual (Page 15)

Page 15
KONTROL 6 Skywire Manual Rev. A Copyright © 2014 Blizzard Lighting, LLC
WARNING: AFTER STARTING FIRMWARE UPGRADE, DO NOT POWER DOWN
KONTROL 6 UNTIL THE UPGRADE FINISHES!!! UNPLUG ALL FIXTURES FROM
KONTROL 6 PRIOR TO PROCEEDING.
1. Turn the unit off.
2. With the unit off, press and hold the & but-
tons.
3. Continue to hold the button combination until KONTROL 6’s LED dis-
play shows “
UP--
.”
4. Release the button combination, then press any button to proceed
with the upgrade.
5. Once upgrade is complete, KONTROL 6 will display the “OK” message
(
ot
) as indicated above.