Specifications, Specifications for loner smd – Blackline GPS Loner SMD User Manual
Page 21

19
Specifications
Specifications for Loner SMD
Size & Weight
Size: 63 mm W x 107 mm L x 22 mm D (2.48” W x 4.213" L x 0.87" D)
Weight: 137 g (4.8 oz)
Safety Features
Fall detection technology: Tri-axis accelerometers, tri-axis gyros,
plus software processing
Emergency latch: Release latch to trigger alert
Silent emergency: Press & hold acknowledge button to trigger alert
Worker motion monitoring: Configurable time window
(1 – 30 min, or off)
Worker check-in (optional): Required check-in period
(5 – 180 min)
Buttons & Indicator Lights
Power button: Power on/off
Acknowledge button: Check-in/Silent Emergency/Cancel Pending
Alerts/Acknowledge Alerts
Emergency latch: Send emergency alert
Red indicator light array plus vibration and buzzer: Safety
alert triggered
Green indicator light: Blinking (powered),continuous (connected)
User Notification
Indicators: Acoustic beeper, LEDs, and vibration motor
Acoustic beeper sound pressure level: ~90 dB @ 10 cm
(~90 dB @3.94")
Wireless Communication
Radio: Quad-band GSM/GPRS (800, 900, 1800, 1900 MHz)
Antenna: Internal quad-band
Bidirectional communication
Firmware upgrade over-the-air (FOTA)
Assisted GPS
Radio: 20 Channel high sensitivity, mobile assisted
Antenna: Internal Ultimate Sense 2® GPS antenna extends opera-
tion in weak GPS signal conditions
Accuracy: ~5 m (16 ft) Outdoors, ~50 m (165 ft) indoors
Real-time location turnaround time: ~20 seconds
Mobile Messaging Methods
Email, text message (SMS)
Alert Messages
Fall Detected
Emergency
Silent Emergency
No-motion
Missed Check-in
Low Battery
Power off
Power & Battery
Rechargeable Li-ion battery: 1200 mAh Li-ion
Battery Life: 12 hours continuous operation
Charging connector: 4-pin sealed connection
Environmental
Storage temperature: -30°C to 75°C (-22°F to 167°F)
Operating temperature: -20°C to 55°C (-4°F to 131°F)
Charging temperature: 0°C to 45°C (32°F to 113°F)
Ingress Protection: Designed to meet IP65
Approvals
FCC Part 15 Subpart B, FCC ID: QIPBGS2, Industry Canada 7830A-
BGS2, PTCRB type approval
Device Requirements
Blackline GPS activated service plan
GSM/GPRS wireless communication coverage
GPS signal coverage required for GPS locating
Warranty
One year limited factory warranty
Wireless Coverage and Activated Service Plans
Wireless coverage: Nearly 150 countries
Service plan options: Contact Blackline
Loner Portal Web Application
Features include: Alarm banner, event history, device location map-
ping, device management, alert & notification settings, and more.