Blackline GPS Loner SMD - Manual (Page 14)

12 // USER GUIDE
Loner SMD Light Annunciation Patterns
Loner SMD features audible, tactile and visual indicators for annunciating different types of
messages. Please see below for these patterns.
Type Beeper
Vibration
motor Indicator
light array
Low alarm Slow alarm
pattern Single repeating
vibrate Slow flash
High alarm Fast alarm pattern Double repeating
vibrate Fast flash
Low battery Single beep once
every 5 minutes No vibration Single flash
once every
5 minutes
No communication No beeper No vibration Slow double
flash
Chirp Single beep Single vibrate Single flash
Ensuring Protection with Loner SMD
When safety monitoring is required, perform the following to ensure you are being pro-
tected with Loner SMD.
1. Press the power button to turn on Loner SMD.
The Power Button Indicator Light on Loner SMD will blink while establishing a
network connection. The vibration motor vibrates and the beeper annunciates the
power on sequence. Loner SMD will continue to flash the Power Button Indicator
Light while it is establishing a network connection.
2. Wait for Loner SMD to establish a network connection. The Power Button Indicator
Light remains on continuously.
3. Wear Loner SMD on your belt at your hip at all times that you require remote safety
monitoring. Perform your work duties as you normally would. Loner SMD auto-
mates remote monitoring of your safety.
4. Power down Loner SMD when remote monitoring of your safety is no longer
required.
™ The Loner SMD logo must face outward, away from your body for optimum GPS and
fall detection performance.