Bird Technologies 4331 - Manual (Page 3)

Safety Precautions
The following are general safety precautions that are not necessarily related
to any specific part or procedure, and do not necessarily appear elsewhere
in this publication. These precautions must be throughly understood and
applied to all phases of operation and maintenance.
Keep Away From Live Circuits
Operating personnel must at all times observe normal safety precautions. Do
not replace components inside equipment with the high voltage supply turned
on. To avoid casualties, always remove power.
Do Not Service Or Adjust Alone
Under no circumstances should any person reach into an enclosure for the
purpose of service or adjustment of equipment except in the presence of
someone who is capable of rendering aid.
Safety Earth Ground
An uninterruptible earth safety ground must be supplied from the main
power source to test instruments. Grounding one conductor of a two conductor
power cable is not sufficient protection. Serious injury or death can occur if
this grounding is not properly supplied.
Shock Hazard
Do not attempt to remove RF transmission line while power is present.
Radiated RF power is a potential health hazard.
i