Bird Technologies 5010 Series-Manual - Manual (Page 17)

5
Chapter 2 Installation
Connecting the Directional Power Sensor (DPS)
1. Do one of the following:
z To connect to a Digital Power Meter:
z
For Models 5010 and 5010B:
Connect the Bird DPS to the “Sensor”
serial port on the DPM using the sensor
cable provided.
WARNING
Never attempt to connect or disconnect RF
equipment from the transmission line while RF
power is being applied.
Leaking RF energy is a potential health hazard.
WARNING
RF voltage may be present in RF element socket.
Keep element in socket during operation.