Bird Technologies 8320 - Manual (Page 6)

About This Manual
This instruction book covers the Tenuline Attenuator Models 8321, 8322,
8323 & 8325, which collectively are refered to as the 8320 Series.
This instruction book is arranged so that essential information on safety ap-
pears in the front of the book. Reading the Safety Precautions Section before
operating the equipment is strongly advised.
The remainder of this Instruction Book is devided into Chapters and Sec-
tions. At the beginning of each chapter, a general overview describes the con-
tents of that chapter.
Operation
First time users should read Chapter 1 - Introduction, and Chapter 2 - Instal-
lation, to get an overview of equipment capabilities and installation. An expe-
rienced operator can refer to Chapter 3 - Operating Instructions. All
instructions necessary to operate equipment appears in this chapter.
Maintenance
All personnel should be familiar with preventative maintenance found in
Chapter 4 - Maintenance. If a failure should occur, the troubleshooting sec-
tion will aid in isolating and repairing the failure.
Parts
For location of major assemblies or parts, refer to the parts lists Chapter 4.
Changes to this Manual
We have made every effort to ensure this manual is accurate. If you should
discover any errors or if you have suggestions for improving this manual,
please send your comment to our factory. This manual may be periodically
updated. When inquiring about updates to this manual refer to the part num-
ber and revision level on the title page.
iv