Bird Technologies 8320 User Manual

Page 16

WARNING

The vent plug must be used at all times when the unit

is in operation or cooling. Failure to do this could

result in damage to the equipment and endanger the

operator’s safety. Be sure to check this plug.

Before placing the Model 8325 Attenuator into service, the

solid shipping plug, P/N 2450-049 must be removed and re-

placed by the spring loaded vent plug, P/N 2450-094. The

vent hole for this plug is located on the top near the rear.

The two plugs are linked together by a piece of bead chain.

The shipping plug should be placed back in the vent hole

whenever the attenuator is to be shipped. Take care not to

lose the O-Ring seal.

Bird Model 8320S Tenuline Attenuator