Shsaconfigparameters structure, Shsatriggerparameters structure, Shsaoccupiedbwtype enumeration – Bird Technologies SignalHawk User Manual
Page 22

Bird Technologies
10
shSaConfigParameters Structure
shSaTriggerParameters Structure
shSaOccupiedBWType Enumeration
The occupied bandwidth type is an enumerated list of valid settings
for the type.
CenterFrequency
Unsigned 64 bit variable (type
Frequency) Specifies the center
frequency in Hz
FrequencySpan
Unsigned 64 bit variable (type
Frequency) Specifies the frequency
span in Hz
VideoBandwidth
Enumerated integer of type
shSaBwSettings indicating the video
bandwidth setting.
ResolutionBandwidth
Enumerated integer of type
shSaBwSettings indicating the
resolution bandwidth setting.
DetectorMode
Enumerated integer of type
shSaDetectorModes indicating the
detector mode.
PreampAttenuation
Enumerated integer of type
shSaPreampAttenSettings indicating
the preamp/attenuation combination
setting. The attenuation and preamp
cannot be independently set.
TriggerMode
Enumerated integer of type
shSaTriggerModes indicating the trigger
mode used for the measurement.
TriggerEvent
Enumerated integer of type
shSaTriggerEvents indicating the trigger
event (edge or level) for the measurement.
PowerLevel
Specifies the power level (of type float)
for the video trigger modes
GateDelay
Specifies the gate delay (of type float)
following a trigger event.
OccBWPercent
The occupied BW level is specified as a
percentage of total integrated power.
OccBWdBc
The occupied BW level is specified in
decibels relative to the total integrated power.