Bird Technologies SignalHawk - Manual (Page 21)

Reference
9
Spectrum Analyzer Types
shSaParameters_t Structure
Contains structures used to configure the various measurements of
the PC Hawk. MeasureId, SaConfigParameters, SaTriggerParameters
are required for all measurements. The remaining structures are mea-
surement specific and can be ignored if you are not using the measure-
ments they apply to.
Field Comments
MeasureId Enumerated int of type shSaMeasureId
indicating the type of measurement.
SaConfigParameters Structure of type shSaConfig Parameters
containing the parameters for a standard
spectrum analyzer measurement
SaTriggerParameters Structure of type shSaTrigger Parameters
containing the trigger parameters.
OccupiedBandwidth Structure of type shSa Occupied
BandwidthConfig containing the
parameters for a Occupied Bandwidth
measurement
ChannelPower Structure of type shSaChannelConfig
containing the parameters for a
Channel Power measurement
AdjacentChannel Structure of type shSa Adjacent
Channel Config containing the
parameters for an Adjacent Channel
Power measurement
ZeroSpan Structure of type shSa Zero Span
Config containing the parameters for a
zero span (time domain) measurement
Counters Structure of type shSa Counters Config
containing the Frequency counter
parameters
DemodSignal Structure of type shSa Demod Signal
Config containing the parameters for a
demodulation measurement