Bird Technologies AT100 - Manual (Page 5)

iii
Caution Statements
The following equipment cautions appear in the text
whenever the equipment is in danger of damage and
are repeated here for emphasis.
CAUTION
Required input is 11 to 16 VDC @ 250mA. Connector
is wired outside positive, inside negative.
CAUTION
AVOID STATIC DISCHARGE
Use proper Electrostatic Discharge (ESD)
precautions to avoid static discharge when making
connections to the test port. Equipment failure can
occur if the test port is subjected to ESD.
CAUTION
250mW max. input
Exceeding the maximum input will cause damage to
internal components. Do not connect transmitter
output to the AT-100. Damage can also be caused by
testing antennas near other transmitting antennas. If
testing base station antennas, first measure the power
at the coax end to be sure it does not exceed 250mW.
CAUTION
Harsh or abrasive detergents and some solvents can
damage the display unit and information on labels.