Bird Technologies 8251D208 User Manual

Page 29

Storage

No special preparations for storage are necessary other than

to cover the equipment to keep out dust and dirt. Store the

unit in a dry and dust-free environment where the ambient

temperature will remain within the -40°C to +45°C (-40°F to

+113°F) working range of the load.

Customer Service

Any maintenance or service beyond the scope of those pro-

vided in this section should be referred to a qualified service

center.

Any equipment returned must be shipped prepaid and to

the attention of the Service Group.

Bird Electronic Corporation maintains a complete repair

and calibration facility at the following address:

Sales/Repair

Facility

U.S.A. Sales and Manufacturing

Service Group

Bird Electronic Corporation

30303 Aurora Road

Cleveland (Solon), Ohio 44139-2794

Phone: (440) 248-1200

Fax: (440) 248-5426

Sales

Facilities

For the sales office nearest you, call Bird Electronic Corpo-

ration at the above telephone number, or visit our Web site

at:

http://www.bird-electronic.com

Preparation

for Shipment

Should you need to return the load, use the original ship-

ping package if possible. Wrap the RF connector with pad-

ding and tape securely in place. It is not necessary to

remove the coolant to ship the load. Simply replace the vent

plug with the shipping plug attached to the bead chain. Be

sure the O-Ring seal is mounted on the plug to avoid leak-

age.

Maintenance