Bird Technologies 7022-Manual - Manual (Page 21)

9
Solid
Blue
Loading FPGA Normally displays for
less than 30 seconds
when sensor is
started. Otherwise
return for service.
Fast Blinking
Blue FPGA Self Test
Failed
Return for service.
Blue/White Slow
Blink
FPGA Prog Init
Error Return for service.
Blue/Red Slow
Blink
Failed to Load
FPGA Update the firmware,
see “Updating the
Sensor Firmware” on
page
10.
If problem persists,
return for service.
Blue/Magenta
Slow Blink
FPGA Register
Failure Return for service
Slow Blink
Yellow
Execution Error Invalid command or
parameter value.
Cycle power.
Fast Blink
Magenta Insufficient
Memory Sensor is waiting for a
firmware update. See
“Updating the Sensor
Firmware” on page
10.
If an update is not
desired, disconnect
then reconnect the
USB cable. Ensure the
button is not pressed.
LED Code Condition Action