Bendix Commercial Vehicle Systems VORAD EVT-300 DRIVER INSTRUCTIONS - Manual (Page 33)

Failure Display Mode
Fault Code Chart
Fault Code Suspect Failure
11 Central Processing Unit
12 Central Processing Unit
13 Driver Display Unit
14 Antenna Assembly
15 Right Side Sensor
16 Left Side Sensor
21 Right Turn Signal
22 Left Turn Signal
23 Brake Input
24 Speed Input
25 SmartCruise Compatibility
31 J-1587
32 J-1939
33 VBUS
34 Driver Display Unit
35 Antenna Assembly
41 No Fault or End of Fault Codes
Report any failures indicated by the Driver Display Unit or Side Sensor Display to
maintenance personnel for service. If the red “FAIL” indicator light comes on while
driving, turn the system off (if available), and do not use until it has been repaired.
Side Sensor failures will illuminate either the red or yellow lights on the Side Sensor
Display. The lights will remain illuminated as long as a failure is detected.
If you have any further questions regarding the Bendix ™ VORAD ® system, call
1-800-247-2725 in the U.S., Canada, and Mexico; contact your OE dealer in Europe.
29