Bendix Commercial Vehicle Systems VORAD EVT-300 DRIVER INSTRUCTIONS - Manual (Page 18)

Side Sensor Indicators
Side Sensor Display Indicators
14
Light/Tones Description
Red/Triple Tone Indicator light illuminates after objects have been detected
by the Side Sensor(s), and remain in proximity for more than
one (1) second. When the right turn signal is activated and
the Side Sensor detects an object, the red indicator light
illuminates, and the Driver Display Unit speaker sounds a
triple tone. The Tone is sounded only once per activation
of the turn signal. (See Figure 9)
Light Sensor The photo sensor senses ambient light and increases the
brightness of the indicator lights during the daytime hours
and decreases the brightness at night. Takes ten seconds to
activate. (See Figure 9)
Yellow Indicator light stays on when no objects are detected by the
Side Sensor(s). (See Figure 9)
Red and Yellow Indicates the Side Sensor is performing a start-up self-test or
there is a failure. (See Figure 9)
Figure 9
Yellow,
No Vehicle Detected
Indicator Light
Red,
Vehicle Detected
Indicator Light
Light Sensor