Bendix Commercial Vehicle Systems VORAD EVT-300 DRIVER INSTRUCTIONS - Manual (Page 12)

Controls Overview
Bendix ™ VORAD ® EVT-300 ™ System Controls
Driver Display Unit
All controls for the Bendix VORAD EVT-300 Collision Warning System are located
on the Driver Display Unit, or on the dash if your vehicle has an integrated display.
System controls and indicators are located on the Driver Display Unit. The optional
Side Sensor Display indicates the status of the optional Side Sensor.
Controls and indicators for the Driver Display Unit are shown below (see fi gure 3) and
described on pages 9 through 13. Indicators for the Side Sensor Display are shown
below (see fi gure 4) and described on page 14.
8
Driver Display Unit
Side Sensor Display Unit (Optional)
Figure 3
Figure 4
FAIL
ON S/C
Warning Level Range Volume
Green, SmartCruise/Accident
Reconstruction
Light Sensor
Red
Orange
Yellow
Driver
Identification
Card Slot
Red, System
Failure
Green,
Power ON/
Driver Identification
Card Status
Volume Control
Power ON/OFF
Speaker
Range Control/
Accident Recorder
Yellow,
No Vehicle Detected
Indicator Light
Red,
Vehicle Detected
Indicator Light
Light Sensor