Bendix Commercial Vehicle Systems WINGMAN ADVANCED FLR20 SENSOR - Manual (Page 46)

46
Appendix F
Bendix ® Driver Interface Unit (DIU): Displays & Alerts
F1 Operator Interface
The Bendix ® Wingman ® Advanced ™ system is either integrated into the vehicle's dash or console, or uses the
Bendix ® Driver Interface Unit (DIU) to communicate with the driver. (For integrated systems, see the vehicle
operator’s manual for more information.)
This Section describes the functions of the DIU. The DIU mounts in, or on, the vehicle dash and provides the
interface between the driver and the Advanced system. The DIU provides visual and audio warnings to the
driver and accepts input from the driver through the “Up”, “Down” and “OK” buttons.
The DIU contains an internal speaker to provide audible warnings, 2 LED arrays (one each in yellow and red),
a single orange and blue LED and an LCD screen for visual warnings, and a light radar sensor to distinguish
between day and night conditions.
F1.1 Start-Up Mode
At initialization, the DIU executes self-test routines during which the following screens are displayed and all
LEDs are activated (power-on bulb check) for approximately 3 seconds. If configured, a power-up tone is
also sounded.
APPENDIX F - DRIVER INTERFACE UNIT (DIU): DISPLAYS AND ALERTS
Appendix F
Buttons
W
ingman
®
Advanced
A Collision Mitigation
Technology by
Bendix
NOTE:
W
ingman ® Advanced
Uses Foundation Brakes
NOTE:
Read Operator's Manual
before using
Three Red LEDs
Illuminated
Single Blue
LED Illuminated
Single Orange
LED Illuminated
All Yellow LEDs
Illuminated
(No LEDs
Illuminated)
(No LEDs
Illuminated)
(No LEDs
Illuminated)