Bendix Commercial Vehicle Systems GEN 5 ABS - Manual (Page 24)

24
14 5 018/003 Solenoid in ATC valve shorted high. ATC Valve.
14 6 018/004 Solenoid in ATC valve shorted to ground.
14 7 018/005 ATC valve open circuit.
14 8 018/002 ATC valve found when it should not be present.
14 12 249/002 or 231/002 Time-out or no connection to engine link (J1922/1939). Data Link.
15 1 254/012 ECU internal trouble code. ECU.
15 2 253/012 ECU internal trouble code.
15 3 253/013 ECU internal trouble code.
15 4 253/012 ECU internal trouble code. ECU (cont.).
15 5 254/002 ECU internal trouble code.
15 6 254/002 ECU internal trouble code.
15 7 254/002 ECU internal trouble code.
15 8 253/013 ECU internal trouble code.
15 9 231/012 ECU internal trouble code.
15 10 254/012 ECU internal trouble code.
15 11 254/012 ECU internal trouble code.
16 1 or 5 251/004 Excessive voltage on PMV Power. Power Circuits.
16 2 or 6 251/003 Low voltage found on PMV Power.
16 3 or 7 251/005 No voltage found on PMV Power.
16 4 or 8 251/005 Open circuit found on PMV Ground.
16 9 251/004 Excessive voltage found on ECU Power.
16 10 251/003 Low voltage found on ECU Power.
16 11 251/002 Voltage difference between PMV Power inputs is too high.
17 1 013/003 Retarder control relay shorted high or open circuit.
17 2 013/004 Retarder control relay shorted to ground.
17 3 249/002 or 231/002 J1922/1939 date link not functioning.
17 4 249/002 or 231/002 J1922/1939 date link time out.
17 5 253/013 Tire size, front to rear out of range.
17 6 253/013 Tire size out of range or parameter fault.
17 7 — Brake light switch not pushed at this power cycle.
17 8 — ATC system is disabled for dynamometer test.
17 10 023/014 Indicator lamp circuit is faulty.
17 12 151/014 Sensor memory bit set, (A sensor trouble code has
occurred, the ECU must read wheel speeds on all wheels
to clear this trouble code.)
Blink Codes
1st. 2nd.
Description Location
MID 136
SID/FMI