Bang & Olufsen BeoTalk 1200 - User Guide - Manual (Page 41)

Technical data 40
Special circumstances relating to
your BeoTalk 1200
BeoTalk 1200 is intended for use on
public, analogue telephone networks.
The telephone answering machine
supports the supplementary service
Caller ID, provided that it is offered by
your telephone company.
Optimum telephone performance can
only be expected in the country for
which your answering machine was
manufactured, as transmission systems,
legal requirements for approval and
supplementary services offered by the
telephone companies vary from country
to country. The packaging states which
country your BeoTalk 1200 was
manufactured for. The national identity
letters are found above the bottom
barcode on the label.
If you have any questions relating to
the use of your BeoTalk 1200, please
contact your local retailer for further
information.
Hereby, Bang & Olufsen declares that
this BeoTalk 1200 is in compliance with
the essential requirements and other
relevant provisions of Directive
1999/5/EC.
Further information is available on the
Internet at:
www.telecom.bang-olufsen.com
Contact Bang & Olufsen Telecom
E-mail: [email protected]
Visit our website at:
www.bang-olufsen.com
Cleaning
Clean your BeoTalk 1200 using a soft
cloth dipped in water containing a few
drops of a mild detergent.
Data
Network
Analogue (PSTN)
Power supply
Netadaptor 240 V AC / 9 V DC
Ambient temperature
+5°C - +55°C
Relative humidity
15% – 95%