Bang & Olufsen BeoTalk 1200 - User Guide - Manual (Page 15)

Installation of BeoTalk 1200
Installation
BeoTalk 1200 can be either placed on
the table or mounted on the wall using
the enclosed bracket and screws.
BeoTalk 1200 should not be placed in
dusty or dirty environments, nor be
exposed to direct moisture.
Wall mounting
• Mount the wall bracket using the
enclosed screws.
• Lead the cord down through the slot
on the back of BeoTalk 1200.
• Lead the cord behind the pin on the
wall bracket so that the cord is held
against the wall.
• Place BeoTalk 1200 on the wall
bracket.
Connection
• Connect the cords as shown on the
drawing.
• Plug in the telephone cord.
• Connect the net adapter to the
telephone wall socket.
If you want to extend the cords, please
be aware that only the cord from LINE
to the telephone network can be
extended. Exchanging the other cords
will affect the functions of BeoTalk
1200.
In order for Caller ID to function, the
BeoTalk 1200 must be connected before
the switchboard, if any.
* Phone socket connection will vary
according to each country
14
*