Bang & Olufsen BeoTalk 1200 - User Guide - Manual (Page 31)

30
Volume
The volume in the loudspeaker can be
adjusted in 8 steps. 1 is the lowest and
8 the highest volume.
The volume can be adjusted while the
clock is shown in the display or while
playing incoming messages or outgoing
announcements.
Note!
The volume cannot be adjusted while
you play outgoing announcements
with Listening-in activated.
Ringing time
BeoTalk 1200 answers incoming calls
after a ringing time of from 1 to 99
seconds. This function is
programmable. The ringing time is
pre-set to 15 seconds, corresponding to
the telephone ringing 2-3 times.
Adjusting the volume
Press
>
to increase the volume
Press
<
to decrease the volume
A broken line in the display shows
the actual volume from 1 to 8
Setting the ringing time
Press
Enter the ringing time desired from
1 to 99 seconds
While setting the ringing time…
Press
>
to move the cursor to the
right
Press
<
to move the cursor to the
left
Press OK to store
The actual ringing time is displayed
The new ringing time is displayed