Bang & Olufsen BeoTalk 1200 - User Guide - Manual (Page 27)

26
Rejection of incoming calls
If you do not want to receive calls from
certain phone numbers, you can enter
these numbers in the Rejection list and
thus make BeoTalk 1200 reject the calls.
You may also transfer a number from
the News list or the Phonebook to the
Rejection list.
BeoTalk 1200 answers the calls
immediately before the phone starts
ringing, independently of the ringing
time that you have entered.
The call will be answered by an
engaged tone. The phone number of
the incoming call will be transferred to
the News list.
BeoTalk 1200 gives higher priority to
Rejection than to Group Announcement.
This means that a call from the number
will be rejected if the same number
exists in both lists.
Note!
Remember to enter the area code when
you store a phone number in the
Rejection list.
Entering phone numbers to be rejected
Press
Enter the first phone number
Press OK
Enter the second phone number
Press OK
Continue this process until the
numbers desired have been entered,
maximum 10
If the list is empty, - is shown together
with index number 1
The numbers are stored in the same
order as they are entered.
The number that is entered first is
shown with index number 1, the
next number with index number 2…
If the phone number has more than
10 digits the index number will not
be shown
Transferring phone numbers from the News list or the Phonebook
Press until the number desired
is shown in the display
Press
Press
OK to store
or
Press
Press
<
or
>
until the number
desired is shown in the
display
Press
Press
OK to store
and the phone number selected
are shown in the display
and the phone number selected
are shown in the display