Bang & Olufsen BeoTime - User Guide - Manual (Page 9)

Select a channel
> Press or in idle mode to
change channel, track or station
on the selected source.
Adjust the volume
> Press or in idle mode to turn
the volume of the selected
source up or down.
WARNING! Prolonged use at high
volume may cause hearing
damage!
Select a light preset
> Press from idle mode to enter
the menu in Display 1.
> Press or to select ‘LIGHT’.
> Press or to enter Display 2
> Press or to select the light
preset you wish to activate.
Options are ‘ON’, 1 – 9, ‘RED’;
‘GREEN’, ‘YELLOW’, and ‘BLUE’.
> To switch on the light preset and
leave the menu, press while
Display 2 is selected.
Adjust the light level …
> Press from idle mode to enter
the menu in Display 1.
> Press or to select ‘LIGHT’.
> Press or to enter Display 3 and
select ‘OFF’.
> Press or to adjust the light
level up or down.
> Press or to select Display 1
then press to leave the menu
without activating a light preset
and switching off lights.
Switch off the light …
> Press from idle mode to enter
the menu in Display 1.
> Press or to select ‘LIGHT’.
> Press or to enter Display 3.
> Press to switch off the lights
and leave the menu.
You can switch off all connected
sources and lights if you press and
hold for more than three seconds.
Available light presets. Refer to the
guide enclosed with your light
control system for further informa-
tion about the light presets.
LIGHT
ON
1
2
3
4
5
6
7
8
9
RED
GREEN
YELLOW
BLUE
9