Bang & Olufsen BeoTime - User Guide - Manual (Page 10)

Set the time and time format
Make sure the clock is set to the
correct time for your alarm
timer and alarm time out to be
executed correctly. To select the time format …
> Press from idle mode to enter
the menu in Display 1.
> Press or to select ‘TIME
FORMAT’.
> Press or to enter Display 2 and
or to select the desired
time format.
> Press to leave the menu.
To set the time …
> Press from idle mode to enter
the menu in Display 1.
> Press or to select ‘TIME’.
> Press or to enter Display 2 and
or to select the hours or
minutes.
> Press or to enter Display 3 and
or to select the hours or
minutes.
> Press to leave the menu.
The alarm clock will not switch to or
from daylight saving auto matically.
The alarm clock can show time in
both 12-hour and 24-hour formats.
Example of the clock.
TIME
FORMAT
24-HOUR
TIME
30 11
10