Select an alarm source – Bang & Olufsen BeoTime - User Guide User Manual

Page 12

Select a source you wish to be

switched on when the alarm
starts to sound.

When the selected alarm source
switches on, you will also hear
the sound of an ordinary built-in
alarm to make sure you wake
up.

You can snooze the alarm sound

by touching the alarm clock,
but the alarm source will not be
snoozed. The alarm source
remains on until an activated
alarm time out is executed or
until you switch off the source.

Depending on the selected
audio or video source, you can
also preset a channel, track, or
station to be played back. You
can select between 99 different
channels, tracks or stations.

To select an alarm source and

channel …

> Press from idle mode to enter

the menu in Display 1.

> Press or to select ‘ALARM

SOURCE’.

> Press or to enter Display 2 and

or to select the desired

alarm source or ‘NONE’.

> Press or to enter Display 3 and

or to select the desired

channel, track or station, if
available. Options are 01 – 99
and ‘NONE’.

> Press to leave the menu.

Select ‘NONE’ in Display 2 if you

wish to deactivate the alarm source
function. Select ‘NONE’ in Display 3
if you wish the source to switch on
the channel, track or station last
viewed or heard.

Select an alarm source

ALARM

SOURCE