Bang & Olufsen BeoTime - User Guide User Manual
Page 17
Wall bracket: Use the wall part as
a template when marking up
where to drill the holes. Use the
enclosed screws and wall plugs to
fasten the wall bracket to the wall.
Slide the holder onto the wall part
until it clicks in place.
Mounting was evaluated for use on
a drywall surface.
Place the alarm clock in the wall
bracket as shown here. It is
important that the bracket holds
the alarm clock in the ‘battery end’
– so that the built-in magnet can
hold it.
You can place the alarm clock
horizontally with the alarm button
to the left or to the right. The
built-in sensor function will adapt
the text in the displays accordingly.
∅ 5 mm
7:30
RADIO
11
30
7:30
RADIO
11
30
17