Bang & Olufsen BeoRemote One - User Guide - Manual (Page 20)

20
You can change the display language of
your BeoRemote One at any time. Once a
language is chosen, all menus and display
messages are shown in this language.
Note however, that to rename sources or
functions, you can only use latin characters.
If by accident, you have chosen a language
you do not want, you can enter the language
menu by pressing
LIST, then press the arrow
button up one step and press the centre
button. Repeat the procedure twice.
Set the language of your BeoRemote One You have access to make more
advanced settings of your
BeoRemote One from the
Advanced menu. You can, for
example, change the display
language and you can reset your
BeoRemote One to factory settings.
You can also,set the IR strength if
you use BeoRemote One to operate
more than one ‘Beo4’ product.
If you use your BeoRemote One for
operation of lights, curtains or blinds you
can make settings for this in the
LIGHT and
CONTROL menus. This may require a
supported Home Automation System.
Contact your Bang & Olufsen retailer for
more information.
BeoRemote One advanced settings
You can reset your BeoRemote One to
factory settings.
To reset your BeoRemote One ...
Press to bring up Settings in
the BeoRemote One display
Press to bring up Advanced
Press to bring up Factory reset
You will be asked to confirm
the reset. Press to confirm the
reset
or, …
… press and hold to exit the
menu without resetting
Reset your BeoRemote One
To set the language of BeoRemote One ...
Press to bring up Settings in
the BeoRemote One display
Press to bring up Advanced
Press to bring up Language
Press to step between
languages
Press to select the language
you want to use
LIST
Settings
Advanced
Language
...
LIST
Settings
Advanced
Factory
reset
BACK
To confirm the reset press the centre button
or press BACK to cancel.
Note! When you reset all settings you have
made for your BeoRemote One will be
deleted.
All settings will
be lost. Please
confirm or
cancel.