Adjusting sound – Bang & Olufsen BeoSound Ouverture - User Guide User Manual

Page 34

N I C E T O K N O W

Adjusting sound

The SETUP button gives access to
adjusting the sound coming out of the
speakers connected to the BeoSound
Ouverture. And it gives access to
storing the adjustment as a permanent
setting, if you like.

All you have to do is choose a source
and then find SOUND? in the display
and press PLAY.

You can then adjust the volume level
and the bass and treble levels to suit
your personal taste; you can alter the
balance between the left and the right
speaker to direct the sound towards
your favourite listening position; and
you can cut the loudness function in or
out as you like.

Each time you press the PLAY button,
a new cue appears in the display,
indicating which adjustment can be
made, and showing the current setting.

Then use the step buttons

▲ and ▼, or

and

to adjust as required.

You can press RESET any time to reset
the sound levels to their original
settings.

However, all you have to do to turn
your adjustment into a permanent
setting of the system, is keep pressing
PLAY, until the display reads STORE?.
Then press PLAY one last time to store
your new sound setting.

Select a source…

Press to access the setup function

The display reads SOUND?

Press to access the sound adjustment
function

Press repeatedly to display the sound
cue you want

Then adjust the sound to your
liking...

Adjusts balance to the left

Adjusts balance to the right

Raises or lowers the sound levels;
cuts the loudness function in or out

Press repeatedly until STORE? is
displayed

Press to store all the current sound
levels

If you haven’t stored your sound
adjustment...

Press any time to reset the sound
levels to their original settings

SETUP

then

PLAY

then

PLAY

then

PLAY

RESET